logoChinese | English

Products

FS20A





Instructions

Principle of the Apollo FS20A Pulse Oximeter is as follows: Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse Scanning & Recording Technology, the Pulse Oximeter can be used in measuring the pulse oxygen saturation and pulse rate through finger. The product is suitable for being used in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before or after doing sports, and it is not recommended to use the device during the process of having sport) and etc.

Major Features

Integrated with SpO2 probe and processing display module
Small in volume、light in weight and convenient in carrying
Operation of the product is simple ,low power consumption
Display parameters: SpO2 value, Pulse rate value, bar graph, Pulse waveform, pulse mark, battery volume,;
Pulse synchronization function. The pulse waveform, pulse mark, and bar graph are synchronous with the pulse beep.
Different display mode. There are four display modes, and the display mode can be changed by pressing the key;
Screen brightness can be changed
Pulse Beep function. The pulse beep is synchronous with the pulse and can be on/off by press key;
Alarm function. When the measurement result is out of the pre-setting threshold, the beep will alarm and the measurement result will sparkle;
Real time voltage indication: voltage indicator always appears and inform the users to replace the new battery;
Automatically power off function: when the device is under the state of measuring interface . it will automatically power off within 8 seconds if the finger falls out of probe.
Display format can be saved after power off.

Main performance

Display Mode:0.96" Dual-color OLED display(blue and yellow)
Screen Resolution:128*64
SpO2 Measuring Range:0%~100%, (the resolution is 1%).
Accuracy:70%~100%:±2% ,Below 70% unspecified.
PR Measuring Range:30bpm~250bpm, (the resolution is 1bpm)
Accuracy:±2bpm or ±2% (select larger)
Measurement Performance in Weak Filling Condition:SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm or ±2% (select larger).
Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ±1%
Power Consumption:less than 30mA
Voltage: DC 2.6V~3.6V
Power Supply:1.5V (AAA size) alkaline batteries × 2
Battery working hour: Theoretical number is 32 hours.
Safety Type:Interior Battery,BF Type

Accessories

Sell in standard:
◆ a hanging rope
◆ a user manual

Physical Identity

Dimension:57(L) × 31(W) × 32(H) mm
Weight:About 50g (with the batteries)

Product color Configuration
Back